The manufacturing process of molded stick ice cream include 8 steps:

1. Filling the mold with partially frozen mix.

2. The filled molds are frozen to a consistency that can support a stick upright a-nd then the stick is i-nserted.

3. Freezing proceeds further until a stiff consistency is obtained.

4. Demold the products. Demolding takes place by passing the molds through a warm brine zone where the outer layer of the products are softened enough so that the products can be removed from the molds. Then the products are removed from the molds by lifting them from the molds.

5. Then the removed products can be dipped in water, chocolate coating, a-nd so on.

6. The coated products can then be dipped in ca-ndy, nuts, sprinkles, a-nd so on, prior to packaging. Some coatings may require a refreezing of the product. This refreezing can be accomplished by immersion in liquid nitrogen. This step may be repeated several times to build up a thick layer of the coating.

7. Packaging with packing machines.

8. The packaged products are put into multipacks or cartons a-nd sent for hardening.